Possibility of funding this product in 3 months interest or more installments if desired. To view different periods press the green tab to access the contact form, for periods of three months, choose to checkout, installment buying.
45 x 67 x 28h cm
h. max adjustable up to 200 cm
Does not include assembly.
Ameba is a new concept of suspension that adapts and conforms to each space, allowing you to choose and create your tastes and needs. The Ameba luminaire consists 5 different shapes that fit together and offer an infinite range compositions. The possibilities are multiple: from a composition with 2 items to a design with infinite shapes, offering unthinkable formats for all types of spaces.
To choose a custom layout we will be happy to assist our customer service phone or through our contact form.
General Environmental - opaque screen:
General lighting fixture whose screen is opaque and therefore distributes light
more strongly up and / or down.
3 x Compact Fluorescent 15W E27 230V Max
Installation and assembly:
Suspended by steel cables adjustable in height. The electrical connection cable
can be connected to any parts; which is like depending on the position of the connection point on the roof.
A connection point can be connected to the ceiling up to 25 modules.
For higher consulting compositions connection system.
Request special cable for installations above 4m ceilings.
Package measurement and weight:
0.1968 m3 / 12.4Kg
Dust accumulation of fluorescent bulbs, lamps, etc. greatly lowers its brightness, thereby wasting energy. Therefore it is essential to use at least once a year a proper cleaning of luminaires and accessories. The savings can be achieved in domestic lighting is up to 20%. The steps Socbou recommends you follow are:
At all times we must act with caution to avoid accidents. The first thing you must do is turn the light off and disconnect power. We must wait for the lamp to be cleaned is cool for two reasons: to avoid burns and prevent explode when handling while still hot.
Once out of its holder the dust with a soft clean cloth. To completely remove dirt can prepare a mixture of water and denatured alcohol equally or a mixture of water with a little ammonia. After soaking a cloth with one of these two preparations, passed gently across the surface.
Before replacing the lamp back in its holder must wait until it is completely dry to prevent short circuits. Finally, once in place can reconnect the light and proceed to on.
Furthermore, it also must maintain good clean screens and lampshades, which must preferably be light and translucent colors to stop spending most light possible.